Home  >  Washing Machine Installation Charge (Top loading)

The height of drain hose

If the height of drain hose is 4 inches or above from the ground, you shall purchase a washing machine with a drain pump. While it is below 4 inches, you can purchase a regular washing machine.

 

Standard Installation of pulsator (paid on delivery)

  1. Install machine to drain hose
  2. Adjust balance
  3. Install rubber bumper (if necessary)
  4. Usage Demonstration
  5. Connect the power cord of the machine to the power supply (customer must provide suitable electrical outlet)
  6. Install drain hose adaptor (if necessary)

Standard Installation

HK$180

 

Extra service of installing pulsator (paid on delivery)

   1. Dismantle used washing machine (not include removal service)

 $100/unit

   2. Dismantle used clothes dryer (not include removal service)

 $50/unit

   3. Change to 13A socket

 $200/each

   4. Connect the power supply

 $50/unit

   5. Install extended brass water piping or PVC tube

 $60/feet

   6. Install brass water piping or PVC accessories

 $60/each

   7. Open wooden hole less than 2 inches of diameter in the kitchen cabinet

$100/each

   8. Lift the new washing machine and install it between the washbasin and the toilet. (Pleases make sure there is enough space)

$200/unit

   9. Input the new washing machine and install it between the washbasin and the toilet. (Pleases make sure there is enough space)

$200/unit

   10. Add deodorant drainage trap

$100/each

   11. Change washing machine tap (Specific type)

$150/unit

   12. Install or dismantle top plate of washing machine  (not include parts fee)

$180/unit

   13. Installation at Discovery Bay (Only available on Tuesdays and Fridays - reservation is required)

$320/unit

   14. Installation at outlying islands, restricted area or remote areas 

 By quotation
 
Brands